A TI-84 calculator online, in your browser
This page works like a TI-84 Plus CE graphing calculator for the things students use most: the Y= editor, WINDOW and ZOOM, TRACE, the CALC tools (value, zero, minimum, maximum, intersect, dy/dx and ∫f(x)dx), TABLE, parametric, polar and sequence graphing, the STAT list editor with 1-Var and 2-Var Stats and 11 regressions (including Med-Med, Logistic and SinReg), list arithmetic, and the matrix editor with ref( and rref(. It follows TI's own order of operations, so answers match what a TI-84 gives for the same keystrokes.
It is a practice tool made by SciCalc, not TI's software, and it doesn't copy TI's keypad or screens. Everything below says which TI document each behaviour comes from, and where we had to make a choice because the documents don't say.
What it copies
Each point below is stated in the official document listed under Sources.
- Order of operations: functions, then powers and roots, then nPr and nCr, then multiplication, implied multiplication and division, then addition and subtraction; equal levels go left to right. So 2^3^2 = 64 and 1÷2π = π/2. (Getting Started (CE), pp. 29–30)
- Ten functions Y1 to Y9 and Y0 in the Y= editor; TABLE with TblStart, ΔTbl and Indpnt Auto or Ask. (Getting Started (CE), pp. 40, 48)
- Results show up to 10 digits. (Getting Started (CE), p. 22)
- ZStandard −10 to 10 on both axes; ZTrig ±2.75π by ±4 with Xscl π/2; ZDecimal ±6.6 by ±4.1; ZInteger ΔX 0.5, ΔY 1, scales 10; ZSquare makes ΔX = ΔY; ZoomFit sets Ymin and Ymax from the functions between Xmin and Xmax; ZBox, Zoom In and Zoom Out. (TI-84 Plus C guidebook, pp. 86–89)
- Graph area of 265 by 165 pixels (from ZStandard’s ΔX = 20/264 and ΔY = 20/164); Xres 1 to 8. (TI-84 Plus C guidebook, pp. 80, 88)
- TRACE starts on the first selected function at the middle X value; left and right move one point, five with the modifier; up and down switch functions; typing a value jumps to that X; the graph pans at the edge. (TI-84 Plus C guidebook, pp. 84–85)
- CALC: value, zero (left bound, right bound, guess; NO SIGN CHANGE if there is none), minimum, maximum, intersect (on the display), dy/dx with H = 1E-3, and ∫f(x)dx with the area shaded. (TI-84 Plus C guidebook, pp. 91–94)
- Lists L1 to L6 with up to 999 values; 1-Var Stats and 2-Var Stats outputs; LinReg(ax+b), QuadReg (3+ points), CubicReg (4+), QuartReg (5+), LinReg(a+bx), LnReg, ExpReg and PwrReg (least squares on the transformed data); r and r² (R² for polynomial fits) with diagnostics on; RegEQ can be stored to a Y= function. (TI-84 Plus C guidebook, pp. 165–167, 203–210, 216)
- Matrices [A] to [J], up to 99 rows or columns; det(, transpose, inverse, integer powers 0 to 255, rref( (needs columns ≥ rows), identity(; errors for mismatched sizes, singular matrices and non-square inverses. (TI-84 Plus C guidebook, pp. 148–163)
- Error names: DIVIDE BY 0, DOMAIN, OVERFLOW, DIMENSION MISMATCH, SINGULAR MATRIX, INVALID DIMENSION, NO SIGN CHANGE, BOUND, STAT. (TI-84 Plus C guidebook, pp. 389–392)
- Graph modes FUNCTION, PARAMETRIC, POLAR and SEQ. Parametric plots X and Y as functions of T from Tmin to Tmax in steps of Tstep (defaults 0, 2π, π/24); polar plots r as a function of θ from θmin to θmax in steps of θstep (same defaults); TRACE starts at Tmin or θmin. (TI-84 Plus C guidebook, pp. 98–99, 103–104)
- Sequences u(n) and v(n) in terms of n and the previous term u(n−1), with a first term u(nMin) for recursive sequences; nMin=1, nMax=10, PlotStart=1, PlotStep=1 by default; plotted as dots against n (Time format). (TI-84 Plus C guidebook, pp. 108–110)
- Med-Med (median-median line from three summary points; at least three points in each group), Logistic y = c/(1+a·e^(−bx)) and SinReg y = a·sin(bx+c)+d (iterative least squares; SinReg needs at least four points and, without a period, X values in ascending order with equal steps). (TI-84 Plus C guidebook, pp. 207–209, 391)
- ref( gives the row-echelon form; like rref(, it needs at least as many columns as rows. (TI-84 Plus C guidebook, p. 161)
- Lists in expressions: L1 to L6 or {1,2,3} on the home screen are worked out element by element; two lists must be the same length, and a single number is used with every element. (TI-84 Plus C guidebook, pp. 171–172)
Not stated officially: our choices
The exam body has not described these, so they are our assumptions. Practise in a way that works either way.
- Angle mode starts in Radian (TI’s CE guide lists Radian and Degree but doesn’t say which is the default).
- Zoom In and Zoom Out use a factor of 4, and TblStart = 0, ΔTbl = 1 at the start (the guides show these screens but not the values in the text we could read).
- dy/dx uses the symmetric difference (f(x+H) − f(x−H)) ÷ 2H with H = 1E-3; the guide gives H but not the formula.
- Q1 and Q3 leave out the median when there is an odd number of values (the guide says Q1 is the median of the points between minX and Med).
- ZoomStat leaves a 10% margin around the data; Plot1 is a scatter plot only.
- Numbers switch to E notation at 1E10 and above or below 0.001, and a home-screen result of 1E100 or more is treated as OVERFLOW.
- minimum and maximum are found more precisely than TI’s stated tolerance of 1E-5, so the last digits can differ from a real TI-84.
- Med-Med groups: with n points sorted by X, the groups have n/3 points each; one extra point goes to the middle group, two extra points go one to each outer group. The intercept is the mean of the three summary points’ intercepts. The guide names the summary points but not these rules.
- Logistic and SinReg are run until the fit stops improving, so the coefficients are the least-squares best fit. A real TI-84 stops after a set number of iterations (SinReg: 3 by default), so its last digits can differ.
- SinReg reports a > 0, b > 0 and c between −π and π.
- ref( scales each leading entry to 1 and uses the largest available pivot; the guide doesn’t say how ties or pivots are chosen, and row-echelon forms are not unique.
- Three parametric pairs and three polar equations here (a TI-84 has six), and two sequences (a TI-84 has three).
Key-by-key steps for the real calculators are in the TI keystrokes guide.
What it does not copy
- TI’s keypad, menus, MathPrint templates, colours, fonts and screen design: the layout and wording are SciCalc’s.
- Graph styles, shading and drawing commands, split screen; Web, uv, vw and uw sequence formats; sequences using u(n−2); CALC and TABLE in parametric, polar and sequence modes.
- Manual Linear Fit and Quick Plot & Fit-EQ; box plots, histograms and the distribution and test menus.
- The other LIST and MATRX MATH commands (sum(, SortA(, row operations and so on), and storing results to lists.
- Programming (TI-Basic and Python), apps, Press-to-Test and complex-number mode.
Sources
- Getting Started with the TI-84 Plus CE Graphing Calculator. pages as listed against each item. Document date: © 2023 Texas Instruments. Checked 2026-11-22.
- Reference Guide for the TI-84 Plus CE Graphing Calculator. ZOOM commands pp. 86–90; regression commands; error messages pp. 101–103. Document date: no date shown in the text. Checked 2026-11-22.
- TI-84 Plus C Silver Edition Guidebook (TI’s full guidebook for the colour model the CE replaced, OS 4.0). pages as listed against each item. Document date: software version 4.0. Checked 2026-11-22.
SciCalc is not affiliated with or endorsed by any exam body or calculator maker. Rules change, so check the official page before your exam. This page is for practice only; it is not the calculator you will see on test day.
Questions
Is this TI-84 calculator online free?
Yes. It runs in your browser with no download or sign-up. It is a TI-84 Plus CE-style practice calculator made by SciCalc, not software from Texas Instruments.
How do I graph a function?
Open the Y= tab, type the function in Y1 (for example X^2-4), make sure it is ticked, and press Graph. ZStandard shows X and Y from −10 to 10.
How do I find where a graph crosses the x-axis?
On the Graph tab choose Calc → 2: zero, enter a left bound and a right bound either side of the crossing (and a guess if you like), then press Calculate.
Can I use a TI-84 on the SAT or ACT?
Yes, both allow graphing calculators without CAS; the TI-84 is not on ACT's prohibited list. AP Calculus requires a graphing calculator. The FE exam and the GED do not allow it.
Why does 1÷2π give 1.570796327 here?
On a TI-84, implied multiplication is on the same level as ÷ and the calculator works left to right, so 1÷2π means (1÷2)π. Type 1÷(2π) for 0.1591549431.
Are my functions, lists and matrices saved?
Yes, in this browser on this device, so they are still there when you come back. Nothing is sent to a server.