SciCalc.net
IndiaFree tools

Tan calculator: tangent of an angle

Type an angle and choose the unit. Standard angles give exact answers (tan 45° = 1, tan 30° = √3/3); tan 90° and tan 270° have no value.

Last updated

tan(60°) =

√3 ≈ 1.732050808

Working

  1. 1tan(60°) = √3exact value at a standard angle
Try:

How it works

In a right-angled triangle, tan θ = opposite ÷ adjacent. For any angle, tan θ = sin θ ÷ cos θ, which is the slope of the line at angle θ. Where cos θ = 0 (90°, 270°, …) the tangent has no value.

tan θ = opposite / adjacent = sin θ / cos θ

Tangent repeats every 180° (π radians), so tan 225° = tan 45° = 1.

θ0°30°45°60°90°
tan θ0√3/31√3undefined

Worked example

From 40 m away, the angle of elevation to the top of a tower is 30°. How tall is it? Height = 40 × tan 30° = 40 × √3/3 = 40√3/3 ≈ 23.09 m.

Exact value of tan 75°

75° is not in the basic table, but it is 45° + 30°. The addition formula tan(u + v) = (tan u + tan v) ÷ (1 − tan u tan v) gives an exact answer:

tan 75° = (1 + √3/3) ÷ (1 − √3/3) = 2 + √3 ≈ 3.732050808

The same steps with 45° − 30° give tan 15° = 2 − √3 ≈ 0.2679491924. The calculator above shows these two angles as decimals, so the exact forms are useful when a question asks for one.

Height from a shadow

A flagpole casts a shadow 12 m long when the sun is 52° above the horizon. The shadow is the adjacent side and the pole is the opposite side. tan 52° ≈ 1.279941632, so

height = 12 × tan 52° ≈ 15.35929959 m

The pole is about 15.36 m tall.

Why does tan get so big near 90°?

As θ gets close to 90°, cos θ gets close to 0, and dividing sin θ by a tiny number gives a huge result. tan 89° ≈ 57.28996163, tan 89.9° ≈ 572.9572134 and tan 89.99° ≈ 5729.577893. The values grow without limit, so at exactly 90° there is no number to give.

Common mistakes

  • Using the wrong angle unit. tan 45° = 1, but with the angle unit set to Radians, tan(45) ≈ 1.619775191, because 45 radians is a different angle.
  • Using the hypotenuse. Tangent is opposite over adjacent. If you know the hypotenuse, sine or cosine is the right choice.
  • Expecting the signs to follow cosine. Tangent is negative between 90° and 180°, so tan 135° = −1, the same as tan(−45°).
  • Rounding too early. Keep the full value of tan θ until the last step, then round the final length.

Tangent of larger angles

θtan θ (exact)tan θ (decimal)
15°2 − √30.2679491924
75°2 + √33.732050808
120°−√3−1.732050808
135°−1−1
150°−√3/3−0.5773502692
180°00
270°undefinedundefined

Tips

  • Angle-of-elevation questions use tan, because you know the horizontal distance (adjacent) and want the height (opposite).
  • tan 90° is undefined; the calculator says so instead of showing a huge number.
  • √3/3 is the same as 1/√3, written with a whole-number denominator.

Questions

What is tan 90°?

Undefined, because cos 90° = 0 and tan θ = sin θ ÷ cos θ.

Is tan 30° equal to 1/√3?

Yes. 1/√3 = √3/3 ≈ 0.5773502692; the calculator writes it as √3/3.

How do I find an angle from a tangent?

Use tan⁻¹ (arctan): tan⁻¹(1) = 45°. See the arctan calculator.

What is the tangent of 45 degrees?

Exactly 1. In a right triangle with a 45° angle, the opposite and adjacent sides are the same length, so their ratio is 1.

Why is tan 0 equal to 0?

tan 0° = sin 0° ÷ cos 0° = 0 ÷ 1 = 0. A line at 0° is flat, so its slope is 0.

How do you put tan in a calculator?

Check the angle mode first, degrees or radians, then take tan of the angle. The same number gives a different answer in each mode. On this page, choose the unit in the Angle unit list.

Sources

  1. NIST Digital Library of Mathematical Functions, Chapter 4: Elementary Functions. Table 4.17.1: exact values at multiples of π/12, including tan(π/12) = 2 − √3 and tan(5π/12) = 2 + √3. Checked 22 November 2026.
  2. NIST Digital Library of Mathematical Functions, Chapter 4: Elementary Functions. Equation 4.21.4: tan(u ± v) = (tan u ± tan v)/(1 ∓ tan u tan v). Checked 22 November 2026.
  3. NIST Digital Library of Mathematical Functions, Chapter 4: Elementary Functions. Equation 4.14.4: tan z = sin z / cos z; Equation 4.14.10: tan(z + kπ) = tan z. Checked 22 November 2026.