SciCalc.net
IndiaFree tools

How to do log on a calculator

Base 10, base e and any other base, and how to check the answer.

Last updated

log and ln

The log key is base 10: log 1000 = 3 because 10³ = 1000. The ln key is the natural log, base e ≈ 2.718281828: ln e = 1.

Any other base

Many calculators have a logab key. If yours does not, use the change-of-base rule:

logb x = log x ÷ log b = ln x ÷ ln b

For log₂ 50, type log(50) ÷ log(2) to get about 5.64385619. On SciCalc you can type log(2, 50) (base first) or use the log calculator.

Checking the answer

Raise the base to your answer and you should get the original number back: 25.64385619 ≈ 50. That is the antilog, and it is the quickest check there is.

Errors you might see

  • log 0 or log of a negative number: Math ERROR, because no power of a positive base gives 0 or a negative number.
  • Base 1: Math ERROR, because 1 to any power is 1.

Log keys by calculator model

These key sequences come from each maker’s own guide. The task is log₂ 16, which is 4.

CalculatorKeys for log₂ 16Guide
Casio fx-115ES PLUS / fx-991ES PLUS Clog 2 SHIFT ) (,) 16 ) =Casio manual: Logarithmic Functions
Casio fx-991CW / fx-570CWSHIFT x² (log) 2 SHIFT ) (,) 16 ) EXECasio manual: Function Analysis
TI-30XS MultiViewThe guide shows no log-base key, so divide: log 16 ) ÷ log 2 ) enterTI-30XS guidebook p. 23
TI-84 Plus CEmath, A (logBASE). In MathPrint mode type the base 2, press ▶, type 16, enter. In Classic mode type logBASE(16, 2), value firstCE Reference Guide p. 50; TI support article 34592

On both Casio families, leaving out the base gives base 10, and both guides show log 1000 = 3 that way. For the TI-84 Plus CE, TI’s support article 34592 gives a shortcut: alpha, F2, then 5 inserts a logBASE template. On the older TI-84 Plus and Silver Edition this needs operating system 2.55MP or later. Full tables are in the Casio and TI keystroke guides.

Which number goes first?

Casio’s log(a, b) and SciCalc’s log(2, 50) put the base first. On the TI-84 Plus CE the MathPrint template asks for the base first, but the Classic form logBASE(16, 2) puts the value first. Swap them by mistake and you get the reciprocal, because loga b = 1 ÷ logb a (DLMF 4.2.10). On SciCalc, log(16, 2) = 0.25 instead of 4.

What are the values of log 1 to log 10?

xlog x
10
2≈ 0.3010299957
3≈ 0.4771212547
4≈ 0.6020599913
5≈ 0.6989700043
6≈ 0.7781512504
7≈ 0.84509804
8≈ 0.903089987
9≈ 0.9542425094
101

You only need log 2, log 3 and log 7. The log rules give the rest: log 4 = 2 log 2, log 5 = 1 − log 2, log 6 = log 2 + log 3, log 8 = 3 log 2 and log 9 = 2 log 3.

Worked example: how many years to double?

$1,000 earns 6% a year, added yearly. When does it reach $2,000? You need 1.06ⁿ = 2, so n = log 2 ÷ log 1.06 ≈ 11.89566105. On a TI-30XS, use the same pattern as the table: log 2 ) ÷ log 1.06 ) enter. Interest is added once a year, so check whole years: 1000 × 1.06¹¹ ≈ $1,898.30 and 1000 × 1.06¹² ≈ $2,012.20. The balance first passes $2,000 after 12 years.

Common mistakes

  • Leaving a bracket open. log(2) × 3 ≈ 0.903089987, but log(2 × 3) ≈ 0.7781512504. Close the bracket right after the number.
  • Putting a power in the wrong place. Casio’s guide shows log₂(4³) = 6 but (log₂ 4)³ = 8.
  • Looking for a base key on the TI-30XS MultiView. Its guide shows only log and ln, so use log x ÷ log b.

Questions

How do I do log base 2?

Use log₂ x = log x ÷ log 2, or enter base 2 in a log-base key or our log calculator.

What is the inverse of log?

10ˣ for base 10 and eˣ for ln; it is called the antilog.

Is log the same as ln?

No. log is base 10 on calculators; ln is base e.

How do I type a log into a calculator?

Press log, type the number, close the bracket and press = or enter. log 1000 gives 3.

How do you calculate the log of a number by hand?

Write the number as a product of numbers whose logs you know. log 20 = log 2 + log 10 ≈ 0.3010299957 + 1 = 1.301029996.

Does the TI-84 Plus CE have a log base key?

Yes. It is logBASE( in the math menu, option A. In MathPrint mode the template asks for the base first, then the value. In Classic mode you type logBASE(16, 2): value, then base.

Sources

  1. Casio fx-115ES PLUS / fx-991ES PLUS C user’s guide (online manual): Logarithmic Functions. Examples log 1000, log₂ 16, log₂(4³) and (log₂ 4)³; base 10 when no base is entered. Checked 22 November 2026.
  2. Casio fx-570CW / fx-991CW user’s guide (online manual): Function Analysis. Logarithm (log): examples log 1000 and log₂ 16; base 10 when no base is entered. Checked 22 November 2026.
  3. TI-30XS MultiView and TI-30XB MultiView Scientific Calculator Guidebook. Page 23, Logarithm and Exponential Functions. Checked 22 November 2026.
  4. Reference Guide for the TI-84 Plus CE Graphing Calculator. Page 50, logBASE(. Checked 22 November 2026.
  5. Texas Instruments knowledge base, solution 34592: logBASE on the TI-84 Plus family. Shortcut alpha, F2, 5 and the operating system note. Checked 22 November 2026.
  6. NIST Digital Library of Mathematical Functions, §4.2 Definitions. Equations 4.2.8, 4.2.9 (change of base) and 4.2.10 (logₐ b = 1/log_b a). Checked 22 November 2026.