How it works
Hexadecimal is base 16, using the digits 0–9 and A–F (A = 10 … F = 15). Each hex digit is exactly four binary digits, which is why hex is used for memory addresses and colours.
1F₁₆ = 1 × 16 + 15 = 31
Negative numbers use two’s complement in the chosen word size, so FF read as an 8-bit number is −1.
Worked example
Work out 1F × A. 1F₁₆ = 31 and A₁₆ = 10, so the product is 310 = 136₁₆. FF + 1 = 255 + 1 = 256 = 100₁₆.
How do you convert hex to decimal by place value?
Each place in a hex number is worth 16 times the place to its right. Multiply each digit by its place value and add.
| Place | Power of 16 | Value |
|---|---|---|
| 1st from the right | 160 | 1 |
| 2nd | 161 | 16 |
| 3rd | 162 | 256 |
| 4th | 163 | 4,096 |
| 5th | 164 | 65,536 |
Example: 4A016 = 4 × 256 + 10 × 16 + 0 × 1 = 1184. A web color works the same way, one byte at a time: #1E3FD0 is 1E = 16 + 14 = 30, 3F = 3 × 16 + 15 = 63 and D0 = 13 × 16 = 208, so the color is RGB(30, 63, 208).
Adding with a carry and subtracting with a borrow
Work from the right, as in decimal, but carry or borrow 16 instead of 10.
2A3 + 1FD: in the right column, 3 + D = 3 + 13 = 16, which is 1016, so write 0 and carry 1. In the middle column, A + F + 1 = 10 + 15 + 1 = 26, which is 1A16, so write A and carry 1. In the left column, 2 + 1 + 1 = 4. The answer is 4A0, and the decimal check is 675 + 509 = 1184.
ABC − 2F: in the right column, C (12) is smaller than F (15), so borrow 16 from the B: 12 + 16 − 15 = 13 = D. The B is now worth one less, so the middle column is 11 − 1 − 2 = 8. The A comes down unchanged. The answer is A8D, and in decimal 2748 − 47 = 2701.
Why does the word size change the answer?
The calculator reads a typed hex number as a two's complement bit pattern in the word size you pick. That matters most for multiplication. Try FF × FF:
- 32-bit: FF is 255, and 255 × 255 = 65025 = FE0116.
- 16-bit: FF is still 255, but 65025 is larger than 32,767, the biggest signed 16-bit value, so the calculator reports that the result is out of range.
- 8-bit: FF is read as −1, so the product is (−1) × (−1) = 1.
Common mistakes
- Typing a prefix or suffix. Enter the digits only: the calculator does not accept 0x in front or h after the number.
- Reading 80 as 128 in 8-bit. Its top bit is set, so the signed value is 128 − 256 = −128.
- Expecting a remainder from division. Division keeps the whole-number part and rounds toward zero, so in decimal terms 7 ÷ 2 gives 3 and −7 ÷ 2 gives −3.
- Forgetting the borrow when one column turns out smaller. The next column to the left must lose 1.
Tips
- Letters can be typed in upper or lower case.
- Pick a word size large enough for your numbers; FF is −1 in 8-bit but 255 in 16-bit.
- Web colours like #1E3FD0 are three hex bytes: 1E, 3F, D0.
Questions
What is FF in decimal?
255 (or −1 as a signed 8-bit number).
How do I convert hex to binary?
Replace each hex digit with its four bits: A = 1010, so 3A = 0011 1010.
Why does division drop the remainder?
Hex mode works with whole numbers, as on handheld calculators. Use the modulo calculator for the remainder.
Can I type 0x in front of a hex number?
No. Type the hex digits only, such as 1F. The calculator rejects the 0x prefix and the h suffix.
What is 7FFFFFFF in decimal?
2,147,483,647. It is 2³¹ − 1, the largest signed 32-bit number.
Why does FF × FF give 1 in 8-bit?
In an 8-bit word, the pattern FF is two's complement for −1, and (−1) × (−1) = 1. Choose 32-bit to get 255 × 255 = 65025 (FE01).
Sources
- Casio fx-115ES PLUS / fx-991ES PLUS C (2nd edition) user's guide, support.casio.com: Base-n Calculations (BASE-N). DEC, HEX, BIN and OCT; and, or, xor, xnor and Not; negative values use two's complement; fractional parts are cut off. Checked 22 November 2026.