SciCalc.net
IndiaFree tools

Engineering notation calculator

Type a number or a calculation. The answer is shown with a power of ten that is a multiple of 3, such as 47 × 10⁻⁶, and the SI prefix that goes with it (µ, so 47 µF for a capacitor).

Last updated

0.000047 =

471000000 ≈ 0.000047

Engineering notation: 47 × 10−6  · SI prefix µ (micro), written before a unit: 47 µm, 47 µF

Working

    Try:

    How it works

    Engineering notation writes a number as m × 10ⁿ where n is a multiple of 3 and the size of m is from 1 up to (but not including) 1000. It matches the SI prefixes, so 47 × 10⁻⁶ F is 47 µF and 2.2 × 10³ Ω is 2.2 kΩ.

    Power10¹²10⁹10⁶10³10⁻³10⁻⁶10⁻⁹10⁻¹²
    PrefixT (tera)G (giga)M (mega)k (kilo)m (milli)µ (micro)n (nano)p (pico)

    Scientific notation differs only in keeping one digit before the point, so 47 × 10⁻⁶ is 4.7 × 10⁻⁵ in scientific notation.

    Worked example

    Work out 3.3 × 4700 in engineering notation. 3.3 × 4700 = 15,510 = 15.51 × 10³. If the numbers were in ohms, that is 15.51 kΩ. Write 0.000047 F with a prefix: 47 × 10⁻⁶ F = 47 µF.

    Tips

    • Most scientific calculators have an ENG display mode; on SciCalc choose Engineering in the Display menu.
    • µ (micro) is 10⁻⁶; m (milli) is 10⁻³. Mixing them up is a factor of 1000.
    • Engineering notation is display only; the stored value does not change.

    Questions

    What is the difference between scientific and engineering notation?

    Scientific notation keeps exactly one digit before the point (4.7 × 10⁻⁵). Engineering notation uses powers that are multiples of 3 (47 × 10⁻⁶), so it lines up with SI prefixes.

    How do I write 0.0022 in engineering notation?

    2.2 × 10⁻³. With a unit, the prefix is milli (m): 2.2 × 10⁻³ A is 2.2 mA. A prefix symbol is never written on its own.

    Can the mantissa be over 100?

    Yes. Its size can be from 1 up to 999.99…, for example 470 × 10³ or −470 × 10³.

    Sources

    1. The International System of Units (SI Brochure), 9th edition (2019), version 4.01, BIPM. Chapter 3, Table 7 SI prefixes (p. 138): names, symbols and factors from 10³⁰ to 10⁻³⁰, including k, M, G, T, m, µ, n, p. Checked 22 November 2026.
    2. NIST Special Publication 811 (2008 edition): Guide for the Use of the International System of Units (SI). §7.9 Choosing SI prefixes (pp. 18–19): prefixes for powers that are multiples of 3; examples 33 × 10⁶ Hz = 33 MHz and 9.52 × 10⁻³ g = 9.52 mg. Checked 22 November 2026.
    3. TI-30XS MultiView eGuide: Modes. NORM SCI ENG: ENG shows a number from 1 to 999 times a power of 10 that is a multiple of 3; display modes do not change stored values. Checked 22 November 2026.